Prestressed Concrete Arc-Shaped Sheet Piles (Product Code: H-BZ)

The H-BZ arc-shaped sheet pile is a new type of prestressed concrete retaining pile that combines the characteristics of “traditional sheet piles” with modern pile manufacturing techniques. It is produced by rationally arranging reinforcement placement and optimizing the forming process, resulting in a cross-sectional profile that resembles a semicircular arc, with flanges on both sides and an interlocking tenon-and-mortise mechanism.

Category:

Sheet pile products

Phone:

86-153 6732 7666

Inquiry

Recommended

Product Details

产品描述

- Commodity name: Prestressed Concrete Arc-Shaped Sheet Piles (Product Code: H-BZ)
The H-BZ arc-shaped sheet pile is a new type of prestressed concrete retaining pile that combines the characteristics of “traditional sheet piles” with modern pile manufacturing techniques. It is produced by rationally arranging reinforcement placement and optimizing the forming process, resulting in a cross-sectional profile that resembles a semicircular arc, with flanges on both sides and an interlocking tenon-and-mortise mechanism.

Product Name

Product Name: Prestressed Concrete Arc-Shaped Sheet Piles (Code: H-BZ)

English name: Prestressed concrete ARC sheet-pile

Product Features

The H-BZ arc-shaped sheet pile is a new type of prestressed concrete retaining pile that combines the characteristics of “traditional sheet piles” with modern pile manufacturing techniques. It is produced by rationally arranging reinforcement placement points and optimizing the forming process, resulting in a cross-sectional profile shaped like a semicircular arc with flanges on both sides and featuring a tenon-and-mortise interlocking mechanism.

Product structural shape

Product advantages

H-BZ piles are manufactured using a centrifugal molding process. Compared to conventional sheet piles, they feature higher concrete strength and denser compaction, as well as superior impact resistance at the pile head. They offer structural stability and durability, eliminating the need for costly post-installation maintenance. Produced in a factory setting, their quality is highly controllable, providing excellent overall cost-effectiveness. These piles are equipped with a tenon-and-mortise interlocking design, ensuring reliable earth-retaining and water-sealing performance.

Product identification

[Example]: Arc-shaped sheet piles of Type II, with a section width of 300 mm and a pile length of 8 m.

Marked as: H-BZ-300-Ⅰ-8 Q/HNZG 05—2024

Product Specifications and Model

The H-BZ arc-shaped sheet piles are available in four standard sizes: 250 mm, 300 mm, 450 mm, and 500 mm. Based on different reinforcement ratios, they are classified into four types: Type I, Type II, Type III, and Type IV. Furthermore, depending on whether the pile body is decorated with a bark-like texture, they are divided into two categories: wood-effect arc-shaped sheet piles and conventional arc-shaped sheet piles.

Prestressed Concrete Arc-Shaped Sheet Piles (Product Code: H-BZ)

Product Implementation Standard: “Q/HNZG 05-2025 Prestressed Concrete Arc-Shaped Sheet Piles”

Section Parameters and Mechanical Performance Table for Arc-Shaped Sheet Piles (H-BZ) (C60)

Note:

1. Both tensile and compressive forces act along the axis of the geometric centroid of the transformed cross-section.

2. The design values shown in the table are ultimate limit state design values for member capacities, calculated based on the material’s design strength. When using these values, the safety factor K must be applied.

3. The torsional design value is an approximate calculated value.

4. The axial compressive design value does not take into account the effect of the slenderness ratio of the compression member.

5. The position of the main reinforcement cover refers to the cover layer on the exposed surface; the thickness of the cover layer can be customized according to requirements.